Taylor Enterprises & Technology
Taylor Enterprises & Technology
1215 26 Street P.O. Box 1071
Fort Benton, MT 59442
406-622-5203
Photos of Some of Our Projects
On the left is a 1903 Springfield chambered in 25-06. It wears an
Elkridge Wild Cat stock. I installed a Timmy trigger and used a heavy
Adam & Bennett barrel.
The firearm to the right is a 240 Wby built on a 98 Mauser
action. I did not build this rifle but did replace the stock with
a Elkridge roll over stock. The owner had a little accident
while on a horseback hunt and the old stock was crushed
when the horse rolled over on it.
The rifle pictured above is a Ruger 77 MKII chambered in 25-06. This project started out with a new action chambered in 270 Win. The customer
already had a .270 and decided he wanted it in a different chambering. We used a Montana Rifleman barrel 26” long. The rifle was Duracoated and
dressed with a Elkridge Snow Tiger laminated stock. The trigger was tuned and broke at 3 pounds.
This rifle is a 6mm Dasher built on a Remington 700 short action. It has
a Montana Rifleman barrel, Holland's recoil reducer, Tubb's recoil lug and
a Choate Varmint Stock with a Lauer Finish.
We also built a 22-250 Ackly Improved on the customer’s other 700
action using the same componets. Both shot 1/4 MOA.
A Taurus PT 92 in Trijcon Dark Earth. This was a well
woren blued sample that we spiffed up with a little
new finish.